jia

Type of Bottle Blowing Machine

2021-11-02 11:58

Full automatic rotary bottle blowing machine, wide mouth bottle blowing machine, special bottle blowing machine for soy sauce and vinegar plastic bottles, reciprocating plastic bottle blowing machine, one-step bottle blowing machine, semi-automatic bottle blowing machine, automatic bottle blowing machine.


Full automatic rotary bottle blowing machine, wide mouth bottle blowing machine, special bottle blowing machine for soy sauce and vinegar plastic bottles, reciprocating plastic bottle blowing machine, one-step bottle blowing machine, semi-automatic bottle blowing machine, automatic bottle blowing machine, five gallon blow molding machine. If the bottle blowing machine company wants to gain profits, it must continue to introduce new products, improve productivity and meet customer needs. At the same time, quality assurance is also very important. If the product types are increased, the production efficiency will be improved, but the quality is not good enough, which will seriously affect the development of the enterprise. Poor quality is usually manifested in stability and reliability. Backward appearance, not professional enough compared with foreign countries.


Basic knowledge of safe operation of plastic bottle blowing machine


(1) Before starting each shift, lubricating oil must be added to each movable part once. (manipulator, manipulator guide rail, mold opening and closing guide rail)


(2) The swing arm can be added every (3-4) days. The large and small chains of the heater can be used once a month. Frequently check whether the reducer of the main engine and the reducer of the heater are short of oil. The main engine bearing can be added every 3 months.


(3) Before production, check whether the moving parts are firm, whether the screws are loose and fall off, especially in places with strong impact, and whether the belt drive parts are abnormal.


(4) Check whether the high-pressure air source, low-pressure air source, power source and water source are normal.


(5) Check whether each emergency stop switch, safety door switch and protective device detection switch are normal.


(6) Check whether the heating head enters the embryo and whether the embryo drops work normally. If the embryo is not inserted in place, the nut of the embryo hold down device can be adjusted.


(7) Check whether the lamp tube is damaged or broken. It should be replaced in time.


(8) Check whether the pneumatic element leaks and whether its movement is sensitive.


(9) Check whether the three-way valve leaks abnormally, whether it is blocked and whether the water cup is too full.


(10) When the solenoid valve of the automatic bottle blowing machine is abnormal, it shall be cleaned in time (once every 3.5 million bottles).


name:
Message:
Verification code:
submit
Comment